![]() ![]() No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. The information given here represents general, non-binding guidelines. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. Our products must not be used in aircraft/spacecraft or parts thereof. For this reason, universally valid statements about the function of our products are not possible. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. GEARMASTER SYN 100 has been approved for the lubrication of grinding mill bearings. GEARMASTER SYN oil meet or exceed the requirements according to ![]() The disposal does not differ from mineral oil. The nominal viscosity should be lowered by one degree when machines and systems operating with oil sump temperatures above 60☌ are changed over from mineral oil to GEARMASTER SYN oils. Owing to the high performance level much longer oil change intervals can often be achieved leading to a reduction of operation and disposal costs. GEARMASTER SYN oils are used in gears, circulation systems and bearings subject to very high or largely varying temperatures. ![]() This results in a very large application range. In comparison to mineral based gear oils, GEARMASTER SYN oils have a far better temperature-viscosity behaviour and better ageing stability. GEARMASTER SYN oils are fully synthetic gear oils based on poly-alpha-olefin, miscible with mineral oil at any ratio.
0 Comments
Leave a Reply. |